You probably use both WiFi and Ethernet every day, but did you know that you can use them both at the same time? It’s true! In this guide, we will show you how to use WiFi and Ethernet together on your computer. We’ll also discuss some of the benefits of using both connections simultaneously. So whether you’re looking to increase your internet speed or just want to be able to use two different networks at the same time, read on for our tips!
One of the benefits of using WiFi and Ethernet together is that you can achieve speeds that are faster than either connection alone. If you have a fast internet connection, using both WiFi and Ethernet can help you get the most out of it. Another benefit is that you can use one connection for data while using the other for things like voice or video calls. This can be helpful if your internet service is not reliable or if you want to avoid using your data allowance.
There are a few different ways to set up WiFi and Ethernet on your computer. The easiest way is to connect an Ethernet cable to your computer and then enable the WiFi connection in your settings. You can also add a second network card to your computer, which will allow you to connect to both WiFi and Ethernet at the same time. If you’re not sure how to do either of these things, don’t worry! We have a detailed guide that will walk you through the process step-by-step.
Once you have both WiFi and Ethernet set up on your computer, you can start using them together! One thing to keep in mind is that your computer will automatically use whichever connection is faster. So if you’re trying to download a large file, it’s best to connect via Ethernet since it will be faster than WiFi. Conversely, if you’re just browsing the web or checking email, WiFi should be fine.
How To Use WiFi And Ethernet At Same Time In Windows 10
Method 1 – Using Registry Editor
If you are a Windows power user, then this method is for you. By using the Registry Editor, we can change a few settings and configure Windows to use both WiFi and Ethernet at the same time. Let’s see how it’s done.
First of all, press “Windows + R” keys together to open the Run dialog box. Type “regedit” in the box and hit Enter key to open Registry Editor.
In the Registry Editor window, navigate to following path:
On the right-hand side pane, look for an entry named “EnableTCPChimney”. If it exists, double-click on it to modify its value. If the entry doesn’t exist, create a new “DWORD (32-bit) Value” with this name.
In the Edit DWORD dialog box, set its value data to “0” and click OK button. Close Registry Editor and restart your computer for changes to take effect.
After restarting your computer, you should be able to use WiFi and Ethernet at the same time in Windows without any problem.
Method II – Using Command Prompt
If you are not comfortable working with Registry Editor, then you can use Command Prompt to accomplish this task. Here’s how:
First of all, open Command Prompt as administrator. For that, type “cmd” in Start/taskbar search field, right-click on the “Command Prompt” entry and then click “Run as administrator” option.
In the Command Prompt window, type following two commands one by one and hit Enter key after each:
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
Close Command Prompt and restart your computer to apply changes. After restarting your machine, you should be able to use both WiFi and Ethernet at the same time without any problem.
Method III – Using Network Connections
If you find the above two methods too complicated, then you can use the built-in Network Connections feature to disable “TCP Chimney Offload” and “Receive Side Scaling”. Here’s how:
First of all, open Control Panel and then go to “Network and Sharing Center -> Change adapter settings”.
Now, right-click on your WiFi connection and then click “Properties” option. In the WiFi Properties dialog box, go to “Configure” tab. Under “Property” section, look for an entry named as “TCP Chimney Offload (IPv & TCP) & Receive Side Scaling”. Select it and then click on the “Value” drop-down box. From the list of values, select “Disabled” option and then click OK button.
Similarly, right-click on your Ethernet connection and then click “Properties” option. Go to “Configure” tab and then disable TCP Chimney Offload (IPv & TCP) & Receive Side Scaling for your Ethernet connection as well.
Once you have disabled these options for both WiFi and Ethernet connections, close all open dialog boxes and restart your computer for changes to take effect. After restarting, you should be able to use both WiFi and Ethernet at the same time without any problem.
I hope that helps and do let us know if you need further assistance.
Method IV – Using Group Policy Editor (GPEdit.msc)
If you are using Windows Pro or Enterprise editions, then you can use the Group Policy Editor to disable “TCP Chimney Offload” and “Receive Side Scaling”. Here’s how:
First of all, open Run dialog box by pressing “Windows + R” keys together. In the Run dialog box, type “gpedit.msc” and hit Enter key to open Group Policy Editor.
In the Group Policy Editor window, navigate to following path:
Computer Configuration -> Administrative Templates -> Network -> TCPIP Parameters
On the right-hand side pane, look for an entry named as “TCP Chimney Offload”. Double-click on it to open its properties dialog box. In the properties dialog box, select “Disabled” option and then click Apply and OK buttons.
Similarly, look for an entry named as “Receive Side Scaling” in the Group Policy Editor window. Double-click on it to open its properties dialog box and then select “Disabled” option. Click Apply and OK buttons to save changes.
Close Group Policy Editor window and restart your computer for changes to take effect. After restarting, you should be able to use both WiFi and Ethernet at the same time without any problem.
So, that’s how you can use WiFi and Ethernet at the same time in Windows. Do let us know if you have any further queries in the comments section below. We will be happy to assist you.